Att rippa cd-lagret på en sacd är förmodligen inget problem, det är väl bara att göra som med vanliga cd's. Men hur gör man för att komma åt sacd-lagret? Det är väl det som är typ 24/88-upplösning, eller?
/ B
Moderator: Redaktörer
Bill50x skrev:Men hur gör man för att komma åt sacd-lagret?
Bill50x skrev:Det är väl det som är typ 24/88-upplösning, eller?
Stereophile skrev:Following are the step-by-step instructions:
1) Connect your Oppo UDP-103 or UDP-105 player to your local area network (LAN), following the instructions in the player's manual. Write down the player's IP address. Make sure your computer is connected to the same LAN.
2) Copy the unZipped AutoScript folder to the root folder of a USB stick.
3) From Sonore ISO2DSD, download the iso2dsd_PC_v7 file (or the one appropriate for OSX or Linux). Put the unZipped files into a root directory on a drive of your computer. (Make sure the drive has lots of space; SACD ISOs are large.)
4) Turn off the player's Auto Play/Resume Modes and power down the player. Insert your prepared USB stick. Turn the player on again. The disc tray should open automatically.
5) Insert an SACD in the tray and close the tray. Wait until the player recognizes the disc.
6) Run iso2dsd_gui.exe from your computer. At top left of the menu that then appears, select "Server Input." Then, under "Output Mode," select "Raw ISO." In the IP Address Port window, enter your player's IP address (from Step 1). Click "Execute." The ripping process will start within few seconds.
7) When the app reports "Done," eject the SACD. To rip more SACDs, repeat from Step 5 or click "Quit."
8) Remove the USB stick. Reboot to return player to normal use.
The result of this ripping will be an ISO file containing everything on the SACD. While this will be playable with the JRiver Media Center or FooBar players, it's better to extract the individual tracks as DSF files. This, too, can be accomplished with ISO2DSD:
1) At top left, select "File Input."
2) Under "Channel Mode," select "Multi" (multichannel) or "Dual" (two-channel).
3) Under "Output Mode," select "Sony DSF." (footnote 6)
4) Click on "Convert DST to DSD."
5) From the list in the "Select Files Port" window, select the filename of the ISO you want to convert.
6) Click "Execute." The extraction process will begin in a few seconds.
7) Repeat as needed.
Användare som besöker denna kategori: Inga registrerade användare och 6 gäster