Behöver förslag på vad jag ska ha för låda till TAD 1601B som skall lira upp till 200Hz..Är slutet det bästa valet när man ska spela lite högre upp i frekvens ?
Element info:
Nominal Impedance 8 Ohm
Lowest Resonance Frequency (Fo) 28 Hz
Frequency Range 28-2000 Hz
Rated Input Power 200 Watt
Maximum Input Power 500 Watt
Sound Pressure Level 97.5 dB/W (1m)
Total Magnetic Flux 277.000 Mx
Magnetic Flux Density 12.400 G
Highest Recommended Crossover 1.200 Hz
Recommended Enclosure 113 - 304 liter
Effective Piston Diameter 335,0 mm
Baffle Opening 352,0 mm
Mounting Dimensions 370,0 mm
Weight 11 kg
Dimensions (diameter x depth) 400 x 167 mm
Theile-Small Parameters TL-1601b
sd - Piston Area 0,0881 Sq M
Revc - DV Voice Coil Resistance 7 Ohm
Levc - Voice Coil Inductance 1kHz (mH) 1,7
BL - Flux Density (TM) 20,5
Vas - Equivalent Acoustic Volume (Liter) 304 liter
Cms - Mechanical Suspension Compliance (x 10-4 m/N) 2761
Mms - Mechanical Mass of Cone and Free Air Load 117 g
Mmd 86 g
Fs - Free Air Resonance Frequency 28 Hz
Qms - Mechanical Q Factor 6,8
Qes - Electrical Q Factor 0,32
Qts - Total Q factor 0,31
Xmax - Max Linear Peak Excursion (O-P) 8,0 mm
Pmax - RMS Thermal power Limit 500 Watt
no - Relative Efficiency 2.00%
Vd (cm²) 705
Max. Excursion Before Damage (P-P) 36,0 mm