Ny Behringer förtärkare som ser lite spännande ut

Vad är bästa uppgraderingen för just din anläggning? Här kan du fråga andra erfarna medlemmar vad deras åsikt är.

Moderator: Redaktörer

Användarvisningsbild
avr7000
Dunder-Don
 
Inlägg: 7256
Blev medlem: 2003-08-27
Ort: area 51

Ny Behringer förtärkare som ser lite spännande ut

Inläggav avr7000 » 2018-08-30 18:29

https://www.gear4music.se/sv/PA-DJ-and- ... rkare/2G8K

Passar t ex mig för att driva 8 basar (2 ohm per kanal)
Hjälper Larsen HiFi AB lite... inte på kommersiell basis men det kan vara bra att veta för att värdera mina inlägg.

Användarvisningsbild
imac
 
Inlägg: 371
Blev medlem: 2007-07-02
Ort: Ciderbältet

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav imac » 2018-08-30 20:33

Bäst att kolla upp vad eluttaget är avsäkrat med :wink:

Användarvisningsbild
Kalejdokom
ARTist
 
Inlägg: 7308
Blev medlem: 2007-10-28

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav Kalejdokom » 2018-08-30 21:31

Lo-Cut, Hej-Cut & Full-Range lägen.

:roll: :)

Användarvisningsbild
NADifierad
inaktiv
 
Inlägg: 15267
Blev medlem: 2009-01-04
Ort: Karlskrona

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav NADifierad » 2018-08-30 22:10

Den verkar prisvärd.
Får hoppas att den inte har problem med låga impedanser, så som vissa inuke.
Stereo = Dator, TV, Optiskt, Najda, InterM R300plus, Fukdist och 2 x 18” infra.

Användarvisningsbild
landa
Redaktör
 
Inlägg: 2431
Blev medlem: 2006-12-31

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav landa » 2018-08-30 23:33

Den är i alla fall bra mycket snyggare än inuken.

Tangband
Semesterfirare
 
Inlägg: 8841
Blev medlem: 2017-11-28

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav Tangband » 2018-08-31 10:54

Verkar vara en helt ny serie på gång
https://www.google.se/amp/s/www.avsforu ... ml%3famp=1

Tangband
Semesterfirare
 
Inlägg: 8841
Blev medlem: 2017-11-28

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav Tangband » 2018-08-31 10:57

Nx-1000
2238:- kostar den

Användarvisningsbild
UrSv
 
Inlägg: 7074
Blev medlem: 2003-10-09
Ort: Linköping

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav UrSv » 2018-08-31 11:10

Men fläktljudet verkar tyvärr störande enligt en del. Avsevärt mycket snyggare än iNuke tycker jag också.
Jag har tyvärr inte tid just nu, jag ska göra ingenting en stund...

Tangband
Semesterfirare
 
Inlägg: 8841
Blev medlem: 2017-11-28

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav Tangband » 2018-08-31 14:23

UrSv skrev:Men fläktljudet verkar tyvärr störande enligt en del. Avsevärt mycket snyggare än iNuke tycker jag också.

Om nx3000:

"Looking through the PDF, they have not updated or changed a single thing on the inside* (or even the outside, with the exception of cosmetic differences). You are still buying the same amp and DSP solution as before with zero updates*. To me this means no adjustment under 20 hz, which was a popular request around here. Even upping the PEQ count from 8 to 10 would have been a great update, but nada. The fans will still be the same loud fans, with the same "variable speed control" as before, which is programmed with the same logic as before: -start cold at the loudness of a lawnmower, then if the unit gets hot, boost up speed to jet engine level. You might not be able to hear the fan quite as well as before because they closed up a large area of the front panel. The small gaps for ventilation on either side of the display have small holes. This means it will be hard to clean and will always look dusty. This unfortunately means very much reduced air flow as well. My guess is that there are no aerodynamic guides inside the chassis to guide airflow, and no added heatsinks for sure, as those would surely add a lot to the production cost. So basically it will likely be a slightly less noisy but vastly less capable cooling system. The conclusion I can draw from that is that it will no longer be a viable solution to fan-swap, as you'll just quickly cook your components. They seem to have fitted larger rubber feet on the bottom to compensate, as these amps have always been heat sinked to the bottom. Maybe the forum can start a crowdfund for a large finned heatsink made of powder coated aluminium that would screw right on to the bottom in place of the feet? They did away with the handles. The handles weren't there so that you could do bench presses with that 12-pound monster. They were there so that if something touches the amp (anything from an overly enthusiastic groupie, to a labrador in the livingroom, or moving furniture when you're vacuuming), it doesn't touch any buttons or worse, snap off your knob!
The new interface is much nicer looking for us home theater folks, but looks much more fragile. The black coating (probably cheap paint on the metal panels) will certainly scratch quickly and easily. YMMV, but to me these don't look anything like the go-anywhere, do anything "beat on 'em who cares" workhorses they replace. I really wonder how popular these will be in the professional market.
The LEDs are cooler-looking, but much less useful. The previous amps had LEDs indicating power levels of -24 dB, -12, -6, clip/protect. The new one has indicators for -40db, -6, -3, protect/clip. They reduced the 4 ohm power claim from 3100W to 3000W. Is this Behringer being slightly more honest or did they really reduce power output? One step forward, two steps bac

Tangband
Semesterfirare
 
Inlägg: 8841
Blev medlem: 2017-11-28

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav Tangband » 2018-08-31 14:25

UrSv skrev:Men fläktljudet verkar tyvärr störande enligt en del. Avsevärt mycket snyggare än iNuke tycker jag också.


Ser ut som en Crown, är fläktarna lika högljudda som förr så finns det ingen anledning till köp- de har ju höjt priset så det ligger i Crown-territorium numera.

Användarvisningsbild
Fackamato
 
Inlägg: 593
Blev medlem: 2008-01-31
Ort: Seattle

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav Fackamato » 2018-09-01 07:25

Vantar sjalv pa att NX6000 ska slappas sa jag kan driva mina tva Dayton Audio 18" Ultimax Subwoofer and Cabinet Bundle :)

Tittade pa NU6000 men det ar ett gammalt steg, saljs inte langre och verkar ha problem.
DIY subs: Harbottle Audio 24UHT x2 slutna. MiniDSP
DIY main: JBL 2226H 15" bas + B&C DE250 med horn (Four Pi clones)
Crest Pro-Lite 7.5 for subs, Rotel RB-981 for JBL, AMP100 for horns

niklasmagnus
 
Inlägg: 509
Blev medlem: 2005-07-12
Ort: Västerås

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav niklasmagnus » 2018-09-01 10:06


Användarvisningsbild
Kalejdokom
ARTist
 
Inlägg: 7308
Blev medlem: 2007-10-28

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav Kalejdokom » 2018-09-01 18:25

Ja, det är ju den som tråden handlar om! :roll:

niklasmagnus
 
Inlägg: 509
Blev medlem: 2005-07-12
Ort: Västerås

Re: Ny Behringer förtärkare som ser lite spännande ut

Inläggav niklasmagnus » 2018-09-01 18:29

Kalejdokom skrev:Ja, det är ju den som tråden handlar om! :roll:


8) :lol:


Återgå till Köpråd


Vilka är online

Användare som besöker denna kategori: TonyM och 8 gäster