Moderator: Redaktörer
Kalejdokom skrev:Idag har MiniDSP lanserat en intressant utmanare, Flex Eight. Förvisso lite dyrare, men om den är "bra" så kanske den är värd pengarna.
Den har bara digitala ingångar, men jag använder ju Yamaha WXC-50 som försteg så det är ju inget problem att köra helt digitalt (fram till utgångarna på DSP:n).
Vad tror vi om denna produkt?
https://www.minidsp.com/products/minids ... flex-eight
What a nice combination of functionality, usability and performance! As with many DAC companies, it is clearly Minidsp has put strong focus on chasing away sources of noise and distortion. Yes, there is some work left to do with intermodulation distortion but other than that, measurement after measurement put a smile on my face. All AV processor and receiver companies lose any excuses they have for not providing this level of performance seeing how the Flex also implements various signal processing modules.
It is my pleasure to highly recommend Minidsp Flex audio signal processor, DAC and ADC. You made my day!
Elfsberg skrev:
Sen kan vi väl göra ett antagande om att den inte låter annorlunda mer än att de lagt till fler utgångar.
Harryup skrev:Elfsberg skrev:
Sen kan vi väl göra ett antagande om att den inte låter annorlunda mer än att de lagt till fler utgångar.
Varför skulle man kunna det? Räcker med en firmwareuppgradering så kanske den låter annorlunda.
hawall841 skrev:Deb här kanske kan va något att testa..
https://www.jjaudio.se/processorer/zapco-dsp-z6iii.html
Calleberg skrev:Den här, eller någon av dess lillebröder, kan kanske vara bra att ta en titt på innan man bestämmer sig:
https://www.thomann.de/se/the_t.racks_fir_dsp_408.htm
pLudio skrev:(produktpris + frakt) * 1,25 + avgift till FedEx för hanteringen av tull och MOMS (PostMord tar 75:- för det så nåt liknande).
I was looking to tri-amp my main speakers to see what I could get out of them and decided to give this DSP a try. The unit is well constructed and mostly made with good quality components, the software is fairly good and easy to understand, but that's where my compliments end. I used it with the provided power adapter, and the noise floor when the unit is active is quite high. To combat this, the DSP automatically lowers the output after some moments without any input. This made it pretty annoying to use on my main home theater speakers where the mains don't produce any sound at periods of time, and when they do get signal, you miss the first few milliseconds until the DSP reacts. It was also not great for music reproduction, where the base noise was quite audible when playing at low levels.
I would consider this DSP if I ever need one for a car setup where the noise floor isn't such a problem, but certainly not for my home audio.
For reference, this is how I had the unit setup: Marantz AV8804 => Dayton DSP-408 => Anthem PVA7 => Focal Aria 963.
I also have a MiniDSP DDRC-88A which I use for room correction and it's dead silent when compared to the DSP-408.
Calleberg skrev:Då går alltså DSP 408 bort helt. De har fulfixat bruset genom att muta utgångarna när det inte finns signal på ingången.
pLudio skrev:Calleberg skrev:Då går alltså DSP 408 bort helt. De har fulfixat bruset genom att muta utgångarna när det inte finns signal på ingången.
Ett standby-läge ("signal sensing turn-on") tycker jag inte låter som fusk.
Kalejdokom skrev:Bump!
Snubblade över ännu en utmanare/kandidat till mitt pågående open-baffle-projekt.
MiniDSP C-DSP6x8, som förvisso saluförs som Car Audio, men prestanda och features verkar ju vara helt ok även för HiFi. Saknas bara FIR-filter (som jag ju inte vet om jag behöver):
https://www.minidsp.com/products/car-au ... /c-dsp-6x8
Någon som har synpunkter?
Klart prisvärd, kostar 3.750 kr hos Sound Imports.
Användare som besöker denna kategori: urdium och 8 gäster