RogerJoensson skrev:Sök och finn svaret man söker... "Snubben i videon igen"
Coanda Effect - Harvard Natural Sciences Lecture Demonstrations -
"molecules that are sitting underneath the airflow feel a friction force to get dragged along with the airflow and leave that area, producing a reduced pressure [...]"
(Han pratar i citatet vid 1:45 om sidan där luftströmmen lämnar objektet)
Har verkligen inte denna dragkraft (på frånsidan) med saken at göra?[ YouTube ]
Vad kallas förresten den är spegelgrejen som används i demonstrationen? Han uttrycker det visserligen, men jag är inte människa att urskilja vad som sägs. Schler'noptics setup är det nog inte, inte heller FLIR and optics som automatöversättningen menar.
Prova att googla på Schlieren optics eller Schlieren photography. Det står mer här https://en.wikipedia.org/wiki/Schlieren_photography På svenska heter det Schlierenfotografering eller eller Slirfotografering.
Det är en mätteknik för att mäta densitetsgradienter hos gaser. OBS! DENSITETSGRADIENTER!! Det är således inte densitetens absolutvärde utan det är magnituden av densitetsförändringen d v s tidsderivatan av densiteten. Eftersom absolutvärde och derivatan ofta/alltid är olika områden så måste man hålla isär begreppen.
Processen bygger på refraktion. Jaha, vad är det tänker många och hur fungerar det? Jo, det är just om detta jag tänkt återkomma till JM om gällande vad man egentligen ser i videon.
Jag tar upp det nu istället.
Wiki skrev:The classical implementation of an optical schlieren system uses light from a single collimated source shining on, or from behind, a target object. Variations in refractive index caused by density gradients in the fluid distort the collimated light beam. This distortion creates a spatial variation in the intensity of the light, which can be visualised directly with a shadowgraph system.
In classical schlieren photography, the collimated light is focused with a converging optical element (usually a lens or curved mirror), and a knife edge is placed at the focal point, positioned to block about half the light. In flow of uniform density this will simply make the photograph half as bright. However, in flow with density variations the distorted beam focuses imperfectly, and parts that have been focused in an area covered by the knife edge are blocked. The result is a set of lighter and darker patches corresponding to positive and negative fluid density gradients in the direction normal to the knife edge. When a knife edge is used, the system is generally referred to as a schlieren system, which measures the first derivative of density in the direction of the knife edge.
Nu är frågan, vad är det ljusa och vad är det svarta?
Jag ser nu att IÖ svarat så jag postar det så här.
Med vänlig hälsning
Peter