Hej
precis som naqref säger så saluför vi inte dessa högtalare idag.
men om intresse finns så självklart tål det att tänkas på.
faktiskt.se handlar ju ändå om ljud för och om entusiaster och "vanliga" männiksor
dessa högtalare från Eventusaudio är
inte i den billigare klassen utan börjar från cirka 59 000 :- /par
Info från tillverkaren;
EVENTUS Audio is a young reality, but despite of our young age we've developed some exclusive technologies for our loudspeakers that are unique in this market.
SACC Technology
This was the first innovation for our products. Using a special layers construction method was possible to create inside our cabinets a very irregular shape to destroy the resonances and dangerous sound reflections. It is important because, doing this, the final sound, in particular in the medium frequencies, is very clear and doesn't suffer for the classic problems created by using the internal damping material. Moreover never before now was so easy possible to create shapes like ours for the cabinets.
Crossover network
Designing our crossover network we give a right attention to the final load of our loudspeakers for the amplifier. The impedance curve and its regularity for Us is a primary elements. Only giving a lot of attention to this matter is possible to create a very "easy drive" loudspeakers. Solid state or vacuum tube amplifiers are perfect to drive our loudspeakers.
Materials
As you know almost the whole of the manufacturers use for the cabinet classic materials like MDF or wood. If you ask them the reasons of their choice they'll reply that these materials are the better choice to create a good sound! Of course the main reasons are others! One over all is the cost of the material. For example the cost of the classic MDF is very very low and it's obvious that the final quality must be the same. For the wood the cost are just little more, but it's very easy to build cabinets using the wood. Yes, because in the end of process isn't necessary to lacquer them. As you know the lacquer is one of the most difficult step! On the wood cabinet is necessary to apply only a transparent layer and the game is done!
For our cabinets we use an exclusive private material, EA-HDR. Differently from the classic materials the cost is about 60 times over the best MDF. Of course the result of this high cost is a spectacular final quality. Our material doesn't suffer for humidity problems, it's very stable material, don't exist problems for the resistance (it's a lot of times more strong than the classic MDF or wood). And, of course, for the sound performances, is perfect. We use different density of our material depends where we use it.
Design
Of course, Italian design! But our design starts from the concept to create a products suitable for all people and countries. Starting from Metis to Nebula, we've gave a lot of attention to the form factor of our products taking always in mind the technical requirements too, of course. The final results ... our Italian style.
Colors
The color of every product is important to create the right desire in the customer. Keeping this in our mind we are able to offer to the customer every color he desire. Yes, you, as our partner, can ask Us any color and combination of them for our products. The paint that we use comes from the automotive field. The quality is a lot of times over the standard paints used from others Company. Of course to reach this results is necessary to use the best paints. Just only to do an example... the standard paints used from the others manufacturer cost about 5-7 euro for each kilogram; our paints cost from 80 to 120 euro for each kilogram! Yes, you've read right, 10 times more! And keep in mind that to lacquer products like ours is necessary to apply more than 10 layers of paint in the lacquer process! You can ask any color and combination you desire, you don't have to pay more!
Components quality
As you can see we use only the best quality components for our products. Drivers, coils, capacitors come from the best Companies in the world. But only using the best components is not enough to do better! In fact, all crossover boards are places outside the drivers chamber, and moreover, are elastically fixed to the cabinet. For the internal wiring we use hi grade cables and we use them in our particular configuration to improve the performances. All drivers are fixed to the cabinet using special elements to enhance the functionality.
av JustAudioMagic_inaktiv » 2007-04-01 12:25 
