Moderator: Redaktörer
RogerGustavsson skrev:Du kan köpa den hos www.thomann.de för ca 10000 kr inkl. frakt. Vid köp från Norge tillkommer moms (och kanske lite tull?).
Säljande text skrev:Lavry Engineering introduces DA10.
A new stand alone stereo digital to analog converter.
The half rack unit can receive AES or SPDIF digital audio on XLR, RCA and optical link.
The DA provides three Clock modes.
The preferred modes are CrystalLock ™ and Narrow Lock modes, but the unit also offers a Wide lock mode based on an internal Sample rate conversion for listening at non standard sampling rates.
The level of the analog outputs (balanced or unbalanced) is controlled by an up–down switch and a 2 digit display.
The “potentiometer free” discrete analog attenuator provides up to 60dB very high precision volume control in 1 dB steps.
A state of the art discrete headphone driver is capable of accommodating at ease even the lowest impedance headphones.
The unit includes a polarity switch, and a Stereo-Mono switch, a feature aimed at mastering studios.
The LavryBlack DA10 features:
- Ultra low jitter modes (without sample rate conversion).
- Included sample rate conversion for non standard rates.
- Potentiometer free digitally controlled analog volume control.
- High power discrete headphone output.
- XLR, Coaxial (RCA) and Optical (Toslink light pipe) inputs.
- Stereo/Mono switch (for monitoring of stereo sound field).
- Polarity Inversion. - Optional twin DA10 19 inch rack mount kit. (available soon)
SPECIFICATIONS:
THD+N at max volume (volume = 55) – typical, 0.0008% FS, maximum 0.0013% FS
Test conditions: 20Hz – 20KHz, -3dBFS sine wave, 22-22KHz BW At all possible settings and switch combinations.
Dynamic Range: -110dB typical, -109 dB minimum
Test conditions: Non weighted At all possible settings and switch combinations.
Drive Capability:
24dBu Balanced XLR output into 1K ohms at Volume = 56 or lower
21dBu Balanced XLR output into 600 ohms at Volume = 53 or lower 18dBu Unbalanced XLR output into 600 ohms at Volume = 56 or lower 20dBu Headphone into 100 ohms at Volume = 56 or lower
20dBu Headphone into 50 ohms at Volume = 50 or lower
Volume Control Precision: Integral linearity (deviation from straight line) – better than 0.1dB
Differential linearity (step size) – better than 0.08dB
AC Power: Voltage 90-264 VAC, Frequency 40-63Hz
CJNE skrev:Söker man på DAC 1 på ebay.de så kommer det upp en annan DAC som ser spännande ut för (nästan) samma pris som DAC-1:Säljande text skrev:Lavry Engineering introduces DA10.
A new stand alone stereo digital to analog converter.
The half rack unit can receive AES or SPDIF digital audio on XLR, RCA and optical link.
The DA provides three Clock modes.
The preferred modes are CrystalLock ™ and Narrow Lock modes, but the unit also offers a Wide lock mode based on an internal Sample rate conversion for listening at non standard sampling rates.
The level of the analog outputs (balanced or unbalanced) is controlled by an up–down switch and a 2 digit display.
The “potentiometer free” discrete analog attenuator provides up to 60dB very high precision volume control in 1 dB steps.
A state of the art discrete headphone driver is capable of accommodating at ease even the lowest impedance headphones.
The unit includes a polarity switch, and a Stereo-Mono switch, a feature aimed at mastering studios.
The LavryBlack DA10 features:
- Ultra low jitter modes (without sample rate conversion).
- Included sample rate conversion for non standard rates.
- Potentiometer free digitally controlled analog volume control.
- High power discrete headphone output.
- XLR, Coaxial (RCA) and Optical (Toslink light pipe) inputs.
- Stereo/Mono switch (for monitoring of stereo sound field).
- Polarity Inversion. - Optional twin DA10 19 inch rack mount kit. (available soon)
SPECIFICATIONS:
THD+N at max volume (volume = 55) – typical, 0.0008% FS, maximum 0.0013% FS
Test conditions: 20Hz – 20KHz, -3dBFS sine wave, 22-22KHz BW At all possible settings and switch combinations.
Dynamic Range: -110dB typical, -109 dB minimum
Test conditions: Non weighted At all possible settings and switch combinations.
Drive Capability:
24dBu Balanced XLR output into 1K ohms at Volume = 56 or lower
21dBu Balanced XLR output into 600 ohms at Volume = 53 or lower 18dBu Unbalanced XLR output into 600 ohms at Volume = 56 or lower 20dBu Headphone into 100 ohms at Volume = 56 or lower
20dBu Headphone into 50 ohms at Volume = 50 or lower
Volume Control Precision: Integral linearity (deviation from straight line) – better than 0.1dB
Differential linearity (step size) – better than 0.08dB
AC Power: Voltage 90-264 VAC, Frequency 40-63Hz
Nån som vet mer om den? Vore intressant med en jämförelse mellan de två.
Vogel skrev:Känner inte alls till Aqvox, men jag lutar något åt Lavry DA-10 i valet mellan den och Benchmark. Jag tickar igång på stegad volym...och Lavry ger generellt intrycket av att vara mycket seriösa med att göra absolut ofärgade produkter. Men vilken man än tar lär man inte bli missnöjd.
Hälsningar
/Henrik
Vogel skrev:Om du finns i Sthlm skulle jag kunna försöka ordna hem bägge enheter för jämförelse. Jag lovar inte att det går, det är inte allt som distributörerna har tillgängligt för demo, men man kan ju alltid kolla.
/H
CJNE skrev:aolite skrev:Velandet är slut och en styck Benchmark Dac är på g från tyskland. Nu är det bara att vänta
Skönt.
Vad fick dig att välja bort de andra alternativen som du var inne på?
woland skrev:Vet bara att den också änvänds i diverse studiosammanhang.
Vore kul att se lite mätningar på den.
Mvh
Användare som besöker denna kategori: Inga registrerade användare och 9 gäster