getting a pair of pi60s to the USA...

Diskussion och gemyt om Ino-produkter, gamla som nya.

Moderator: Redaktörer

Användarvisningsbild
hundredwaters
 
Inlägg: 1
Blev medlem: 2009-11-17

getting a pair of pi60s to the USA...

Inläggav hundredwaters » 2009-11-18 08:30

Dear Forum Members....

I am very interested in trying to obtain a pair of pi60s delivered to the US, perhaps in Wenge or Walnut. I am aware that the QM60 is supposed to be offered in the US, but I think it would be out of my price range. Thus, I was hoping to order a pi60s kit and solder the cross-overs and due the construction myself, assuming it would be less expansive. Any advice would be greatly appreciated. My email is shapirob@ucla.edu.

Thank you!

Ben Shapiro

Användarvisningsbild
screen
interlaced
 
Inlägg: 5044
Blev medlem: 2005-01-30
Ort: Sveriges varmaste plats!

Inläggav screen » 2009-11-18 09:42

Dear Ben,

I don't think that would be possible as the Constructer Ingvar Öhman requiers that they have been heard and explained at a demo here in Sweden first.

Thereafter he requires a good thinkover before ordering.
This would mean that you would be making the journey to Sweden at least twice to be able to obtain these speakers.

Also, the construction of the pi60s is very complicated. I doubt it will be made by anyone except by Ingvar if they are to be accurate.

When thinking about you making two times travel to Sweden to get these, I do think that the QM60 in this case still will be the best choise regarding the price at the end.

You are very welcome to this sight though and I hope you'll stay? :)
Mvh Björn//

Visst fan är masur vackert!
http://i28.photobucket.com/albums/c213/ ... /TS330.jpg

Användarvisningsbild
FinnGus
 
Inlägg: 76
Blev medlem: 2007-06-26
Ort: Täby

Re: getting a pair of pi60s to the USA...

Inläggav FinnGus » 2009-11-18 09:48

hundredwaters skrev:Dear Forum Members....

I am very interested in trying to obtain a pair of pi60s delivered to the US, perhaps in Wenge or Walnut. I am aware that the QM60 is supposed to be offered in the US, but I think it would be out of my price range. Thus, I was hoping to order a pi60s kit and solder the cross-overs and due the construction myself, assuming it would be less expansive. Any advice would be greatly appreciated. My email is shapirob@ucla.edu.

Thank you!

Ben Shapiro


Hi Ben,

Welcome to the forum! I can see that somebody's been doing his homework. Good detective work, I must say, or maybe not so difficult with Google nowadays...

Anyway, I know that it is IÖ's principle that one has to attend one of his listening/lecturing sessions to get the full picture about and history behind the Pi60s before one may purchace a kit. Furthermore, it's my understanding that there's a waiting list - even for the kits.

But I firmly recommend, no I urge you to call Ingvar himself, as he's the only person who can give you a complete and correct answer.

Phone: +46 70 523 3232 - and not too early in the morning (swedish time), I've heard...
FinnGus

...nu börjar det DIY-Glöda...

pingvinlakrits
 
Inlägg: 2225
Blev medlem: 2005-05-13

Inläggav pingvinlakrits » 2009-11-18 09:50

Ben; as you might now Ino Audio does not ship to the US or anywhere else for that matter. He is very strict with that. Ino Audio is reserved for the Swedish market with the exception that he sells to anyone willing to come to audition them. Buyers have flown in from across the globe to do that.

He does not sell pi60s unless you audition first, so in any case you would have to fly over here in person. Normally you are not allowed to place an order during the audition but perhaps an exception could be arranged if you made it over here.

He does not carry the veneered boxes in stock for pi60s, which also means anything from a couple of weeks to a couple of months delivery. You would not be able to bring a pair back with you.

The only viable option would be to buy a used pair and convince the seller that they would ship them to you in the US. It would cost you though and I think it would be very hard to find a pair unless you are willing to pay a premium.

The risk involved with that kind of transaction (damage to speakers in transit, high value item etc) means that anyone selling a pair like the one you are after would much rather sell them at the domestic market.

I would personally never bother to ship a pair of pi60's abroad. I sold my pair in a matter of days here when switching to a divided system (stand speakers and bass modules from Ino).

If would be much easier for you to order a pair of QM60's. Considering the price of pi60s and freight and insurance involved it would work out pretty much the same.

Best regards, Henrik

pingvinlakrits
 
Inlägg: 2225
Blev medlem: 2005-05-13

Inläggav pingvinlakrits » 2009-11-18 09:54

Oh, did you want to build the cabinets yourself?
He does not allow that for pi60s - that is for sure. Not even if you are a schooled carpenter.

It is much too complicated a design and he does NOT want inferior cabinets floating around the market due to errors / misinterpretations of the cabinet enclosure.

I would not even bother calling him asking to buy a speaker/crossover kit as he does not allow it in any case.

My advice is as stated before; head for the second hand market and be patient and be prepared to open up the wallet.
We could help you with finding a pair on the domestic market but everything from sealing the deal to shipment is on you.

/ Henrik
Senast redigerad av pingvinlakrits 2009-11-18 10:09, redigerad totalt 1 gång.

Användarvisningsbild
UrSv
 
Inlägg: 7084
Blev medlem: 2003-10-09
Ort: Linköping

Inläggav UrSv » 2009-11-18 10:07

Hi Ben,

Just a personal question. Are you "The" Ben Shapiro born in 1984 in Burbank, California?

Användarvisningsbild
staxe
 
Inlägg: 115
Blev medlem: 2007-12-26

Inläggav staxe » 2009-11-18 12:04

Hi Ben

The best place to find a pair of used pi60s is here: http://www.hifimagasinet.com
Just click on the "Sök!" button to check out the classifieds. pi60s are not often seen but sometimes a pair pops up.
Happy hunting!

Användarvisningsbild
MagnusÖstberg
 
Inlägg: 30031
Blev medlem: 2009-03-30

Inläggav MagnusÖstberg » 2009-11-18 12:16

Hi!

The best way to ask questions are directly to the company, inoaudio@hotmail.com

The idea of getting them used and shipped are proberly the way to go..
Jag saknar dig.
Medlem på www.faktiskt.se sedan 2006

Användarvisningsbild
shifts
Med fasen rätt!
 
Inlägg: 11251
Blev medlem: 2007-08-17
Ort: Stockholm

Inläggav shifts » 2009-11-18 13:11

I thought the email adress was to be avoided if you really wanted a reply.

What a fantastic project this would be; getting Ben a pair of pi60s. :D
2021 maj på Spotify

Användarvisningsbild
realist
 
Inlägg: 661
Blev medlem: 2005-01-30

Inläggav realist » 2009-11-18 13:13

Hi!

Also have in mind that the QM60 is much better estethical than the "undesigned" pi60s. In my view, at least.

Användarvisningsbild
Tumme
 
Inlägg: 567
Blev medlem: 2006-08-01

Inläggav Tumme » 2009-11-18 18:15

Another problem is that no ino audio speakers come in boxes. ino audio dont even ship in sweden. So if shipped you or someone would have to find the box to ship them.

Thomas

Användarvisningsbild
EA_73
 
Inlägg: 1406
Blev medlem: 2006-04-12
Ort: Jönköping

Inläggav EA_73 » 2009-11-20 21:52

Get a friend here in Sweden and settle for the pi60 DIY-kit without boxes. :D Shipping costs for elements and filter to the u.s would not be more than 150 us dollars. Order the speakerboxes from a local carpenter.

You are going to be more than satisfied :)

dimitri
 
Inlägg: 4604
Blev medlem: 2003-09-20
Ort: Götelaborg

Inläggav dimitri » 2009-11-24 10:15

Jag hade litet PM utbyte med Ben för några år sedan på ett annat forum. Jag har då erbjudit mig att på ngt sätt hjälpa till om han nu skulle vilja köpa talarna. I första hand rekommenderade jag kontakt med IÖ och att skriva på Faktiskt. Vilket han nu gjorde. Han PM-ade mig samtidigt och jag svarade. Har inte fått svar på det ännu.
Jag kan bara bekräfta att han är en seriös forumdeltagare. Vet inte varför han inte svarar vare sig här eller på mitt PM. Antagligen har något kommit i vägen.

Användarvisningsbild
KarlXII
Dussinmänniska
 
Inlägg: 28546
Blev medlem: 2007-02-17
Ort: Himlafiket

Inläggav KarlXII » 2009-11-24 11:47

Jag tycker att det började se rätt illa ut här - samtidigt var det ju rätt festligt måste jag säga.

Eventuellt spam/roligheter fortsätter i Bentråden i testforumet, mer tjafs här kommer att raderas på ett mycket kliniskt sätt.

Vi ger Ben en chans, helt enkelt.

/K12



Som sagt, klinisk radering. Hoppas ingen blev överraskad.

Sannolikt kommer inte den gode Ben tillbaka med tanke på allt skit som postats här. Men han har fortfarande chansen. Posta inget spam här.
Snälla.
T H E. G O O S E B U M P. F A C T O R


Återgå till Wänner af Ino


Vilka är online

Användare som besöker denna kategori: Majestic-12 [Bot] och 3 gäster