Får jag göra en minikidnappning av tråden?
Det är nämligen så att jag har varit så sugen på ett komponenttweak i drygt ett år men inte kommit till skott, dels för att jag behöver leja ut jobbet och dels för att jag inte vet om det är värt besväret.
Här tycks det ju hejvilt och jag kan inte tänka mig en bättre tråd att fråga i...
Tweaket är på min Pioneer Ax10i
<snip>"only need to modify the DAC board, or I/V and post filter stages.
JRC5534 is used in I/V converter stage with 13V/mks slew rate and
JRC2068 with 6V/mks slew rate in the post filter and in the digital volume adjustment stage,
all on the DACs PCB.
We decided what are the best op amps to make such kind of upgrade. The most expensive OPA627.
They sound "warmer", and with the high resolution of DSP processing of AX10i it is a bit better but one may still prefer the more refined sound of AD825.
Concerning the exchange of JRC2068, the decision was pretty easy - OPA2134.
We could use again OPA627 (only single version available, so it is necessary to have the special dual-to-single PCB adaptors), but this exchange will be
significantly more expensive, and from our point of view the effect is not worth it."
Vad säger ni? Låta göra eller inte ???
Länk till original text om tweaket;
http://members.cox.net/alexhardware/49TXi.htm
Kul att höra om någon orkar tycka...